About company Products Certification Contacts Colour Shades
 
 
 
Sealing textures and additives
   
Construction textures
   
Primer top alkid paints
   
Construction paints
   
Wood lacquers and primers
   
Military paints
   
Primers and top car paints
   
Special paints
   

Wood lacquers and primers (see more products in price list)

 

Woodfinish Lacquer

Clear Gloss WoodFlnish Lacquer.

Description: A two component, clear glossy, high quality non-yellowing lacquer with 10-25% catalizator. Coverage: 1 litre covers approx. a 15 sqm. surface. Preparation: Painted wood surfaces must be clean of dust, dirt and previous lacquers.

Application:
Apply over sealer primer coat after sanding dean dry surfaces. Add 10% catalizator and dilute with D-21 as required. Using a lacquer sprayer, spray a very thin and even coat from a distance of approx. 30 cm. A second coat is recommended after thoroughly sanding the first coat.
Drying:
To contact -1 hr. Complete drying -12 hrs.
Precautions:

Highly flammable - work in a well ventilated room. Do not ingest and avoid contact with skin and eyes. Keep out of reach of children.

 

 

Bernish

Tinted Clear Wood Stain.

Description: A clear multiple tinted wood stain for interior and exterior use which accents and beautifies the natural wood texture of any surface. It provides long lasting durability against very harsh conditions and humidity, preventing mildew and rotting.

Coverage:
1 litre covers approx. a 15 sqm. surface.
Preparation:
Surface to be painted must be clean of dirt, dust and previous paint.
Application and Dilution:
Can be applied with a brush, roller or by spraying. Sand surface well between coats. Dilute with white spirit as needed. At least 2 coats are recommended.
Note:
Each coat strengthens the depth of the stain. The final tint may vary according to the original natural wood color.
Drying:
For contact 3-4 hrs, completely dry after 24 hrs.
Precautions:
Highly flammable - only use in a well ventilated room or outdoors. Do not ingest and avoid contact with akin and eyes. Keep out of reach of children. Contains no lead or chromates .
 
 

Denbercoat

Synthetic Primer top Wood.

A white synthetic primer for wood and wood construction, for exterior and interior use.

Tints:
White color.
Gloss:
Mat finish.
Coverage:
1 litre covers a 10-15 sqm. surface .
Preparation:
The surface to be painted must be clean of dust, dirt, grease and previous paint.
Application and Dilution:
Brush - ready to use. Spraying - dilute 10-15% with synthetic thinner.
Drying:

For contact 4-6 hrs. Completely dry after 24 hrs.

Shelf Life:

Up to 24 months below 25C when sealed properly.

Precautions:
Highly flammable - only use in a well ventilated room. Do not ingest and avoid contact with skin and eyes. Keep out of reach of children.

 

Denlacq 88

 

   

Clear High Gloss Wood Lacquer.

Description: A high gloss protective wood lacquer for Interior and exterior use, suitable for doors and doo frames. A long lasting wood lacquer, providing durability even under very harsh conditions.

Coverage:
1 litre covers approx. a 10-15 sqm. surface.
Preparation:

The surface to be painted must be clean of dust, dirt, grease or previous paint. Sand surface between coats.

Application and Dilution:
Apply with a brush or by spraying. Dilute with white spirit for brushing and D-18 synthetic thinner for spraying, Stir well before use. Sand surface between coats. At least 2 coats are recommended.
Drying:

For contact 3-4 hrs, completely dry after 24 hrs.

Precautions:
Highly flammable - only use in a well ventilated room or outdoors. Do not ingest and avoid contact with skin and eyes. Keep out of reach of children.
  Contains no lead or chromates.

 

PrimerSealer

Clear Primer for Wood Lacquers.

Description: A clear one component lacquer primer for wood surfaces.

Coverage:
1 litre covers about a 15 sqm. surface.
Preparation:

The wood surface to be painted must be dry. Sand the surface before applying to clean it from dust, dirt, and previous lacquers.

Application and Dilution:
Spray a very thin coat from about a 30 cm distance. Sand well between coats.
Dilute:
with nitro D-21 thinner as required. At least 2 coats are recommended.
Drying:

To contact and between coats -1 hrs. Complete drying - 12 hrs.

Precautions:
Highly flammable -work in a well ventilated room. Do not ingest and avoid contact with skin and eyes. Keep out of reach of children.

 

 
© Denber Paints & Coatings Israel Ltd 2004

Design&programming © Click