|
|
military paints (see more products in price list) |
|
| |
Electric insulation Paint |
|
|
 |
Description: Paints and lacquers for insulation of electric systems, both permanent and mobile. It is used to paint generators, electric boxes, high tension wires, motors, switching systems, etc.
TopColor 7: Synthetic electric insulation paint diluted up to 20% with D-32 thinner as required. For complete drying - 24 hrs at 25C.
DenberDeuke 7: A nitro electric insulation paint. Dilute up to 20% with D-20 as required. For complete drying - 90 min. at 25C .
Tanubar 7: An alkyd melamine electric insulation paint. Dilute up to 20% with D-32 thinner. Dry after 30 min. in an oven at 150C. |
Tints: |
White, black, gray, red, or off white. |
Gloss: |
Glossy, Silk, or mat finishes are available. |
Coverage: |
1 litre covers approx. an 8-I3 sqm. surface.
|
Preparation: |
The surface to be painted must be clean of rust, dirt, grease and previous paint. |
Application: |
Apply by spray or with a brush. |
Shelf Life: |
TopColor 7 - 24 months, DenberDeuke - 7-12 months at 25C in a shaded area. Tanubar 7 - for an unlimited time at 20C in a shaded area. |
|
|
 |
|
| |
Galvanized TutGum |
|
|
 |
Galvanized Metal Paint.
Description: An easy to apply one component galvanized metal paint. It binds well to surfaces and lasts many years. |
Tints: |
White, black , blue, red, and yellow. |
Gloss: |
Mat. |
Coverage: |
1 litre covers approx. an 8-10 sqm. area. |
Preparation: |
The area to be painted must be clean, dry and grease-free. |
Application : |
Apply by spray or with a brush. |
Dilution: |
Dilute with D-32 thinner. |
Drying: |
For contact -15 min. Final drying - 30 min. |
Shelf Life: |
Up to 12 months at 20C in the shade.
|
|
|
|
|
| |
Vashbar Primer |
|
|
 |
Excellent Anti-Corrosive Primer
Description: A2 component yellowish, transparent all purpose primer paint which attaches to all surfaces including galvanized metal, it gives a protective primary coat which is anti-corrosive and will last many years. |
Gloss: |
Silk . |
Coverage: |
1 litre covers approx. a 10 sqm. area. |
Preparation: |
The surface to be painted must be clean and dry. Mix it 1:1 with a hardener and its ready to use. |
Application : |
Apply by spray or with a brush. |
Drying: |
For contact - 6 hrs. Final drying -24 hrs. |
Shelf Life: |
Up to 24 months in a sealed container at 20 ° C in a shaded area.
|
|
|
|
|
Military Camouflage Paint |
|
|
Camouflage Paint.
Description: A military camouflage paint for jeeps, trucks, tanks, airplanes artillery etc. It is applied in 2 coats with two tints which when combined provide military camouflage for deserts or forested areas.
First coat: A2 component primary coat epoxy paint, the color of desert sand, rich in zinc to prevent rust and long lasting. Mix 1:1 with a hardene r. The paint is then ready to use by spraying and gives a mat finish.
Second coat A2 component polyurethane paint with a greenish-brown tir and a silk finish. It is spotted on the primary coat. Before use ft is mixed 1 with hardener and diluted up to 20% with D-11 thinner. |
|
Each litre mixed with hardener will cover approx. a 10 sqm. area. |
Preparation: |
The area to be painted must be clean of dust grease and oil paint. Under field conditions, sand the old paint to obtain a smooth surfac e and remove any loose paint then paint a 2nd coat only. |
Application : |
Apply by spray or brush, two layers of each coat should be applied.
|
Shelf Life: |
Up to 24 months at 20 o c in the shade, if a hardener has not be added. |
| |
The paints do not contain lead. |
| |
| |
|
|
|
|
|
