|
|
construction textures (see more products in price list) |
|
| |
Bertexin |
|
|
 |
Interior Textured Plaster Overcoat.
Description: Creates a fine textured finish over painted or treated walls. |
Tints: |
White. |
Gloss: |
Mat finish. |
Coverage: |
1,5 kg covers approx. a 1 sqm. surface .
|
Preparation: |
The surface to be painted must be clean of rust, dirt, grease and previous paint. It is recommended to first apply one coat of DenbeRoll and a second coat of DenberCryl before applying BerTexin. |
Application: |
Apply using a roller or pistolet sprayer. Apply only above +5C. Allow a 30 day drying period for new walls and concrete surfaces before applying. Dilute a max. of 5% with water only if needed. |
Dilution: |
Spraying: 1st coat dilute 10% with water, 2nd coat after 2-3 hrs without diluting. |
Drying: |
Between coats -3 hrs. Complete drying - 12 hrs. |
Shelf Life: |
Up to 12 months below 25C in a sealed container. Don't store below 0C. |
Note: |
Contains no poisonous materials or asbestos. |
|
|
|
 |
|
| |
BerTexOut |
|
|
 |
Textured Protective Acrylic Overcoat fop Exterior Use
Description: creates a protective textured acrylic coat for outside walls, bricks, concrete surfaces, cement and asbestos boards. It is climate resistant and highly durable. |
|
White and Natural colors. |
|
Mat finish. |
Coverage: |
1-2.5 kg covers approx. a 1 sqm. surface. |
Preparation: |
The surface to be painted must be clean of dust, dirt, grease and previous paint . |
Application: |
It is recommended to first apply one coat of DenbeRoll and a second coat of DenberCryl before applying BerTexOut. |
Dilution: |
Apply only above +5C. Allow a 30 day drying period for new wall sand concrete surfaces before applying. When spraying, dilute the 1st coat 10% with water and the 2nd 5%. When using a roller dilute a max. of 5% with water only if needed. |
Drying: |
Between coats - 3 hrs. For complete drying - 24 hrs.
|
Shelf Life: |
Up to 12 months below 25C in a sealed container. Don't store below 0C.
|
Note: |
Contains no poisonous materials or asbestos. |
| |
|
|
|
|
| |
DenberSchpachtel |
|
|
 |
All-Purpose, Ready-Mixed Joint Compound.
Description: A vinyl joint compound, ready to apply for filling, leveling finishing coats. It is suitable for embedding dry wall, tape reinforcement, tilling gaps between boards. |
Application and Dilution: |
Ready to use. Mix until achieving a smooth consistency, Dilute with no more than 5% water if necessary. Paint over only after completely dry. |
Note: |
Excessive water causes abnormal shrinkage and poor adhesion. |
Shelf Life: |
Up to 12 months below 20C in a sealed container. Don't store below 0C.
*Contains no poisonous materials or asbestos.
|
|
|
|
|
| |
SuperFlax |
|
|
 |
Highly Flexible Acrylic Coat for Roots.
Description: A highly versatile water base paint made from a unique white acrylic copolymer. It is excellent for sealing roof surfaces, rubber sheets, fiberglass, tar, and concrete castings. |
Coverage: |
3 litres covers a 1 sqm. surface. |
Preparation: |
The surface to be painted must be clean of rust, dirt, grease and previous paint. |
Application : |
Apply using a brush, roller or airless sprayer. Do not apply over damp surfaces or during damp weather. Recommended to apply using fiber glass or cloth as an intermediate coat. Apply only above 7C. |
Dilution: |
Dilute with water -1st coat 20-30% - 2nd coat - no dilution. |
Drying: |
For contact and between coats - 30-60 minutes. Final drying 14 days. |
Shelf Life: |
Up to 12 months in a sealed container between 5-25C. |
Precautions: |
Work in a well ventilated room or outdoors. Do not ingest and avoid contact with skin and eyes. Keep out of reach of children. Contains no poisonous materials or asbestos. |
|
|
|
|
SuperFlex- Wall |
|
|
Covering for Walls and Cracks in Walls.
Description: A special water based wall paint made from acrylic copolymers which provides a thick and flexible wall covering for walls, cracks in walls and exterior walls. |
|
Semi-Gloss. |
|
1 litre covers approx. a 1-1,5 sqm. surface. |
Application and Dilution: |
Apply the first coat with a brush, diluting 70% with water. For the 2nd coat use a roller without diluting. Spraying is not recommended. |
Drying: |
Hardens within 24-36 hrs. |
Storage: |
Protect from cold and below 45C. |
|
|
|
